Keeping pace with the times and continuously innovating technologically has enhanced the group's core competitiveness.
Operating procedures for sleeve tapping machine
Release Date:
2013-12-07
Operating procedures for sleeve tapping machine 1. Before operation, check whether the main locking bolts are firm and whether the power switch and circuit are in good condition. Wear labor protection articles as required, Non tapping workers are forbidden to operate. 2. Before operation, lubricating oil and grease must be injected into the specified refueling parts. The machine can be operated only after it operates normally, flexibly and reliably. 3. Before tapping, the workpieces and tools to be tapped must be placed neatly and smoothly. 4. Adjust the tap size and depth tapped by the tapping machine to meet the required size before starting the operation. Prevent slippery teeth and insufficient teeth. 5. It is strictly forbidden to wear gloves during operation. Female employees with long hair,
Operating procedures for sleeve tapping machine
1. Before operation, check whether the main locking bolts are firm and whether the power switch and circuit are in good condition. Wear labor protection articles as required, and non tapping workers are not allowed to operate.
2. Before operation, lubricating oil and grease must be injected into the specified refueling parts. The machine can be operated only after it operates normally, flexibly and reliably.
3. Before tapping, the workpieces and tools to be tapped must be placed neatly and smoothly.
4. Adjust the tap size and depth tapped by the tapping machine to meet the required size before starting the operation. Prevent slippery teeth and insufficient teeth.
5. It is strictly prohibited to wear gloves during operation. Female employees with long hair must be pulled into the work cap.
6. For deep screw holes or blind holes, it is necessary to tap in and out several times to facilitate chip removal. When tapping a small workpiece, it must be fixed with a fixture to ensure the tapping quality and processing safety.
7. The iron filings and iron foams discharged during tapping shall be left with spaces or slots to facilitate the discharge of sundries and clean them at any time. Lubricating oil shall be added to the screw tap every 8-10 workpieces.
8. Frequently self check the tooth pattern quality of the workpiece. It is not allowed to "attack to the end" without inspection.
9. During tapping, select the speed of the machine tool according to the requirements of the workpiece to ensure the tapping quality. Adjust the appropriate speed of the machine tool.
10. In case of any abnormality during operation, stop immediately. Operation with disease is prohibited.
11. When troubleshooting or repairing, cut off the power supply, completely stop the standby bed, and notify relevant personnel for repair. Do not repair the machine while it is rotating.
12. After the work is completed, the power supply must be cut off. Clean the worktable and remove the iron filings in time. Sort out the workpieces, place the materials in order, stack them neatly, and make marks.
Shanghai Dirui Reinforcing Project Co., Ltd has been committed to the R & D and production of sleeve tapping machine and sleeve processing equipment. The dgs-40 sleeve tapping machine produced by the company has simple operation and stable performance. The reducer adopts the products of domestic brand Guomao group with low failure rate. It is an ideal equipment for producing reinforcement straight thread sleeve at present. When purchasing the company's sleeve tapping machine, the company can also train a set of process for producing reinforcement connecting sleeve. Welcome to inquire.
Key words:
More information
24-hour service hotline
Business Fax: 021-39565956
Mobile phone:+86 18016039660
Address: No. 83, Huishen Road, Nanxiang Town, Jiading District, Shanghai